MAGLOGIX XBAM-L-500 Manual De Instrucciones página 4

Proper use
The permanent lifting magnet XBAM-L-500 is designed to lift ferromagnetic, metallic loads and may only be used
according to its technical data and determination. Proper use includes adherence to the start-up, operating,
environment and maintenance conditions specified by the manufacturer. The user bears sole responsibility for
understanding the operating manual as well as for proper use and maintenance of the lifting magnet.
Device description
The XBAM-L-500 is a switchable lifting magnet with manual actuation for the lifting, transporting and lowering of
ferromagnetic materials. By pressing the lever (F) down, the magnetic field generated by the permanent magnet (D)
can be activated in the lower magnetic plate area (C). Thanks to the special design, a very compact magnetic field
is generated which develops excellent adhesive force, especially on thin materials (less than 10 mm). The magnet
can be deactivated by first pressing the safety tab (E) with the heel of the hand and then moving the lever upwards.
An eyelet (A) is situated on the top of the lifting magnet for attachment to a crane. The load-bearing capacity of the
lifting magnet is equivalent to 1/3 of the maximum breakaway force of the magnet and thus is equivalent to the
standard safety factor 3:1.
A) Load hook
B) Basic body
C) Magnetic surface
D) Center of the magnet
E) Safety tab
F) Lever for activation/deactivation
4