Danfoss TS710 Guia De Instalacion página 4

Installation Guide
1 . Installation Steps
EN
User Guide can be downloaded from: heating.danfoss.com.
1 . Installation must be done by an authorised
electrician .
2 . Remove and mount timer/programmer back plate
direct to wall or on wall box, and wire as required for
application, see fig . 1 & 2 on page 22 . The backplate
included within the product packaging should be
used for the installation .
3 . Locate hooks at top of timer/programmer into top of
back plate, lower into position and tighten retaining
screws .
2 . Dimensions and Wiring
See fig .3 for dimensions and fig .4 for wiring diagram
on page 23 .
4
TS710 & FP720
VISUS14F Danfoss Heating Solutions