Viega 15312 Instrucciones Del Producto

Product
Instructions
New Foam Staple Gun
Applications
The New Foam Staple Gun is a manually operated stapler
used to attach Viega PEX Barrier tubing to rigid foam
®
board insulation. The Stapler drives 2½" and 1½" plastic
staples to hold tubing to 1" or thicker rigid foam board
insulation. (Staples sold separately)
Features
• Extended handle allows staples to be driven while
standing, reducing fatigue and installation time
• Compatible with 2½" and 1½" barbed staples
• Staples fit tubing up to ⅝" nominal diameter
Operation
Load staples by sliding them down the arm of the tool.
The tape that holds the rows of staples together does
not need to be removed. Align tool over tubing (groove
in foot of tool helps guide the tool) and push down firmly
on handle to shoot staple through foam board. Staples
should be placed every 2 feet along tubing, with 3 on
each bend (one in the center and one at each end of the
bend), or as required to keep tubing from lifting up.
Always use keyhole shape at
turnarounds to allow for tubing
contraction and expansion.
Staple Compatibility
Part Number Staple Length
15312
15313
This document subject to updates. For the most current Viega technical literature please visit www.viega.us
Click Services -> Click Electronic Literature Downloads -> Select Product Line -> Select Desired Document
Viega LLC, 100 N. Broadway, 6
PI-PR 520952 0414 (New Foam Staple Gun) (EN ES FR)
Box Quantity
2-1/2" 300 pcs.
1-1/2" 300 pcs.
Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 316-425-7618
th
Dimensions
Part Number
Height
Width
Length
Weight
21432
36"
4"
8"
5.5lbs.
1 of 2