Publicidad
Idiomas disponibles
Idiomas disponibles
How to Clean
E How to remove and clean.
1. Puli off the steam cap to
remove as shown
in the figure.
e Be sure to unplug and carry out these
operations when the unit has cooled down.
e DO NOT use objects such as benzine, thinner,
cleansing powder or metal scrubbers.
m
Z
G}
E
T
T
2. Remove the valve holder
Body / Outer lid / Upper rim {
Wipe with a damp cloth.
© DO NOT use a dishwashing
detergent.
right to left.
Wash and wipe with
a damp cloth.
PE
remove ruboer.
O
OR
3. Wipe the inside of the hole with
a damp cloth.
Wash with a dishwashing detergent
and sponge and wipe off.
Please do not remove steam dome
when using rice cooker
@ How to fit steam cap.
1. Insert the valve holder into the
steam cap by setting the tab of
the holder (A) into the slot of the
cap (B) and turn it from left to
right until it seats properly.
=
_.
.
Dew collector
Remove and clean with damp cloth
after every use.
Pan sensor
lf an object has become stuck to the sensor, remove it by
lightly sanding it using fine sandpaper ( of about 4 600 grit ) /
El How to fit steam dome.
(In case it 's accidentally taken off)
Place steam dome into its holder
by inserting steam dome tabs (C)
in to slot (D). Align mark on
dome (1) and mark on
steam cap (2).
Then press
steam dome
into steam cap
until i seats
property (You! li hear the sound "click').
Note : The steam dome will only fit
one way. Do nat force it in or it
may be damaged.
2. Put the steam cap into the hole
of outer lid.
steel wool. Then wipe with a damp cloth.
Accessories
Steaming rack
Measuring cup
Rice scoop
Wash with a dishwashing detergent and sponge.
El at
Publicidad
