Publicidad
Idiomas disponibles
Idiomas disponibles
to
L.
rear-mounted
CB antenna
(not included)
passenger's
helmet headset
(not included)
driver's
helmet headset
(not included)
6. Installation Instructions
1) Mount the JMCB-2003K to the left handlebar using the mounting
bracket kit that is applicable to your specific make and model of
motorcycle. (Mounting Bracket Kits are sold separately.)
2) Route the wires from the CB radio down the handlebar. Plug
in the black 9-pin plug from the supplied wiring harness. Connect
the power wire (red) directly to the positive (+) post of the battery.
Connect the orange wire to a switchable power source or accessory
terminal so that the unit is automatically turned off when the ignition
is turned off. Connect the black wire to a frame ground (not to the
battery negative). If it becomes necessary to replace the fuse, use a
5 amp fuse for the red wire.
6-pin
plugs
black
9-pin
plugs
6-pin din
J.
6-pin
plugs
J.
6-pin din
J&M Plug-and-Play
Radar Detector Connection
Harness (not included)
iPod Bluetooth
Adapter Part#
JMDM-IPBT-JCB03
power for
GPS
for radar
detector
black 6-pin plug
M.
K.
black
2-pin
plug
inline
noise
filter
black
red
battery post +
ground to
frame
orange
12 volt switchable
source
3) Connect the black 6-pin plug to the auxiliary audio cable and route
the cable to the auxiliary audio source.
4) Route all other cables where desired and hook them up according
to the wiring diagram.
5) Secure all wires and cables with the zip ties provided.
—3—
Radar Detector
iPod/iPhone
OR
black
3-pin plug
fuse
passenger CB transmit
holder
switch with -SL unit
(not included)
iPhone/iPod
(not included)
cable
N.
aux cable
personal stereo/CD/
MP3/iPod
music device
(not included)
Publicidad
