Publicidad
Idiomas disponibles
Idiomas disponibles
User Manual
Installation
1.
Ensure all devices are powered off before connection. Once the power supply is connected the
Power LED will illuminate.
2.
Connect an HDMI input device to the HDMI IN port.
3.
Connect the displays to the HDMI Output ports using HDMI cables.
4.
Power on all devices.
5.
For simple push button control use the switches on the front panel.
6.
For IR control, please ensure the IR receiver is in line of sight of the IR remote. For instructions
on the various functions of the IR remote please see the diagrams below.
7.
For RS-232 control, please connect a PC to the RS-232 port of the switch and open a RS-232
terminal software. For instructions on the RS-232 commands please see below.
Operation
Front Panel
RS232 – Connect to a PC/Notebook for the use of RS-232 commands
Mode – Cycles between the available video output modes. For specific control please use the IR remote
or RS-232 control
IR – IR receiver window for control using the included IR remote
R/L – 3.5mm analog audio output for connection with headphones or speakers
Power Switch – Toggles the main power to the unit on and off
Rear Panel
OUTPUT 1-9: Connect each output to a single HDMI display using a HDMI cable
HDMI IN: Connect an HDMI source device using a HDMI cable
DC/12V – Connect the included power supply and connect to a mains power outlet
English
Publicidad
