Anthem LTX-500 Manual De Instrucciones página 35

4 Select the Hue , Saturation or Brightness using the
5 Use the
/ button to adjust.
Hue 7
●
You can switch between Before and After using the [TEST] button of the remote control.
6 To end
BACK
Input Signal > HDMI
HDMI
11
Confi gures HDMI input signal.
Input
Color Space
Control with HDMI
●
The setting is available only if the HDMI terminal is selected.
●
Abbreviation
CEC: Consumer Electronics Control
Input Signal > COMP.
COMP.
12
Confi gures the input signal for the component video input terminals.
Color Space
●
The setting is available only if the component video terminals are selected.
Check
After
TEST
BACK BACK
Auto
Standard
Enhanced
Auto
YCbCr(4:4:4)
YCbCr(4:2:2)
RGB
On
Off
Y Pb/Cb Pr/Cr
RGB
SCART
/ button.
Save Color Management?
Yes No
Automatically confi gures the input signals.
Select this when the dynamic range of the input images is
16-235.
Select this when the dynamic range of the input images is
0-255.
Automatically confi gures the input signals.
Select this when the Y Cb Cr(4:4:4) video signals are
input.
Select this when the Y Cb Cr(4:2:2) video signals are
input.
Select this when the RGB video signals are input.
Enables CEC communications.
Disables CEC communications.
Select this when the component video signals are input.
Select this when the RGB video signals are input.
Select this when RGB video signals and sync signals are
input via the SCART interface for European markets.
ENGLISH
OK
35