Xiaomi Instant Photo Printer 1S Manual De Usuario página 7

Power Bu on Instructions
Press
6 seconds
Press and hold
for 6 seconds
6 times
Continuously
press 6 times
Notes:
· Once the network is successfully reset, all
indicators will remain on for 1 second.
·
Printing will not be interrupted by pressing or
pressing and holding the power bu on.
· Updating firmware will not be interrupted by
pressing or pressing and holding the power bu on.
· It is recommended to turn off and restart the
printer when an error occurs, and the printer will
try to fix the error automatically once restarted.
Power Indicator Descriptions
Off
On
Blinking
rapidly
Blinking
slowly
Wi-Fi Indicator Descriptions
Blinking
orange
Blinking
blue
Blue
Orange
Note: If the Wi-Fi indicator remains orange,
first check if the Wi-Fi can access the
Internet normally.
Turn on/off
Reset the network
Restore factory
se ings
Turned off
Turned on
/Standby
Printing
Updating the
firmware
In sleep mode
Awaiting
connection
Connecting
Connected
successfully
Couldn't
connect
Direct Connection Bu on
Instructions
3 seconds
Press and hold
for 3 seconds
Note: The direct connection function cannot
be enabled during turning off and firmware
updating.
Direct Connection Indicator
Descriptions
Off
Blinking
orange
Blue
Blinking
blue
Error Indicator Descriptions
Off
Blinking
orange
6
Enable/Disable the
direct connection
function
Direct connection
function disabled
Awaiting
connection
Successfully
connected to
the printer
The device is awaiting
direct connection when
there is already another
device in direct connection
with the printer.
The printer is working
normally.
Printer error, follow the
instructions in the app
to solve the error.