How to clean air outlet and outside panels
I
Clean with soft cloth.
When it is difficult to remove stains, use water of neutral
I
detergent.
Clean the air inlet grille when it is shut.
I
Do not use gasoline, benzene, thinner, polishing
NOTE
powder, liquid insecticide. It may cause discoloring or
warping.
Do not let the indoor unit get wet. It may cause an
electric shock or a fire.
Start up after a long stop
Confirm the following:
Check that the air inlet and outlet are not blocked. Remove any
I
obstacle.
I
Check if the earth is connected.
Clean the air filter and outside panels.
After cleaning the air filter, make sure to attach it.
I
Turn on the main power supply switch.
The control panel display lights when the power is turned on.
I
I
To protect the unit, turn on the main power switch at least
6 hours before operation.
What to do when stopping the system for a long period
Turn on FAN OPERATION for half a day and dry the unit.
I
Refer to the operation manual of the outdoor unit.
Cut off the power supply.
I
When the main power switch is turned on, some wattage is
being consumed even if the system is not operating.
The remote controller display is turned off when the main power
I
switch is turned off.
Disposal requirements
Dismantling of the unit, treatment of the refrigerant, oil and any other
parts, should be done in accordance with the relevant local and
national regulations.
CS-20~125FMHPP
Urban Multi air conditioner
4PW12340-1B
N
OTES
Installation and operation manual
9