1. Turn on laser: Press
2. Turn off laser: pressing
laser tool.
* The system default measurement starts at the single distance measuring.
* If no key is pressed for 90 sec, the device switches off automatically.
* If the info icon appears with a number, observe the instructions in section
"Error Code Table".
Function switch
1. Press the button
2. Press the button
3. Confirm this by pressing the measuring button
4. To exit the function switch menu, press the
340337975_MNL_IN_V02.indb 48
340337975_MNL_IN_V02.indb 48
button to turn on the laser tool.
button for ≥ 3 seconds to turn off the
to access the function switch menu.
to select the required function.
48
.
button.
09-06-2022 12:40
09-06-2022 12:40