Brock WK 2201 LL Manual De Instrucciones página 7

GB
18. CAUTION: Before lifting the kettle from the base make sure that the kettle is turned off.
19. This equipment is intended for domestic and similar use, such as: staff kitchens in stores,
offices and other work environments, utility rooms, by customers in hotels, motels and other
residential environments of this type, in bedrooms and dining rooms.
20. Always use caution when boiling water in the kettle. Do not touch the housing of kettle or lid.
Do not open the lid during boiling in kettle or immediately after boiling, because steam coming
out of lid can cause burns.
21. Move the kettle only by holding it by handle..
22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
23. Never switch on kettle without water.
24. Never use kettle without filter or with open cover (automatic shutdown will not work).
25. Descale your kettle regularly. Using kettle with heating element covered by scale may cause
damage.
26. Do not use aggressive detergents to wash the kettle housing - they can damage the kettle or
remove the markings.
27. The device is not designed to work with external schedulers or separate remote control
system.
28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
29. Children aged 3 to 8 years old can enable and disable the device only when it is in its normal
position of use, they are supervised or instructed on the safe use and understand the resulting
risks. Children aged 3 to 8 years old can not connect device, operate, clean or maintain.
Three operating modes: heat water to 100 °C, heat water to a selected temperature (60-70-80-
90°C), keep warm.
Internal LED light with a variable colour backlight indicating:
60 °C – green
70 °C – blue
80 °C – yellow
90 °C – purple
100 °C – red
SPECIAL SAFETY INSTRUCTIONS FOR THE KETTLE
•Use only cold water when filling the device.
•The water level must be between the MAX. and MIN. marks.
•Switch the kettle off before removing it from the base.
•Always ensure that the lid is tightly closed.
•The base and exterior of the kettle must not become wet.
•Kettle body used must match with the kettle base.
USING THE ELECTRIC KETTLE
BEFORE FIRST USE: Fill up the kettle with water, boil and pour. Repeat three times. To remove
possible scent of manufactory, please boil few times water.
1. Fill the kettle with water. Make sure that heating plate is fully immersed in water.
2. Place the appliance on the flat, even and heat resistant surface.
3. Plug the kettle to the 230~50Hz mains, press ON/OFF switch. Indicator lamp will light.
4. After boiling water the kettle will automatically switch off.
5. Before taking the kettle out of the base make sure it is switched off.
6. The kettle can manually be switched off in any time by ON/OFF switch.
7. Keep lid closed during boiling process. Or the kettle won't automatically switch off.