Publicidad
Idiomas disponibles
Idiomas disponibles
Important information
EN
All documents relating to this product and further
information are available online: www.bernstein-badshop.com
The instructions are part of the Bernstein-product.
If the instructions are NOT followed, personal injury, product and/or property damage may result.
The installation should be carried out only by sanitary installers who have appropriate professional training,
knowledge and experience.
Read and follow the instructions carefully. We reserve the right to make technical improvements
and optical changes to the products shown.
Before installation, the installation regulations of local utility companies and country-specific standards must be observed.
Lines must be flushed according to the applicable standards before installation and pressure differences between hot and cold water
connections must be compensated. For installations with instantaneous water heaters, observe the manufacturer's instructions for
the instantaneous water heater.
To avoid water damage, enclose pipes with acetic acid-free silicone.
Technical data
Operating pressure
Recommended
Hot water temperature
Care instructions
Abrasive or aggressive cleaning agents may damage the surface.
To clean, use a ph-neutral detergent (pH 7) along with a soft, lint-free cleaning cloth.
Apply spray detergent to the cleaning cloth and DO NOT spray directly onto the product. Spray mist can penetrate the smallest
openings and crevices, damaging the surface.
Clean regularly, or immediately if the surface becomes dirty. Long cleaning intervals can lead to soiling that is difficult to remove
For daily cleaning: Wipe the surface with a soft, damp cloth.
For heavier soiling, apply warm water and detergent to the cleaning cloth. Then wipe off detergent residues with a soft, damp cloth
and dry the surface.
max. 0,5 MPa | 5 bar
0,3 MPa | 3 bar
max. 60°C
3
Publicidad
