Publicidad
Idiomas disponibles
Idiomas disponibles
1.
SAFETY SUMMARY
DANGER:
- DO NOT pour water into the remote controller (hereafter called "controller"). These products
are equipped with electrical parts. If poured, it will cause a serious electrical shock.
- DO NOT operate switches by wet hand. It may cause an electrical shock.
- In case that the protective devices often function or the operation switches do not function
well, turn OFF the main power supply and contact your service contractor of HITACHI.
- In case that other abnormalities are found, stop the system, turn OFF the main power supply
and contact your service contractor of HITACHI.
WARNING:
- DO NOT perform installation work and electrical wiring connection by yourself.
In case that a service work such as repair, maintenance, etc. is required, contact your service
contractor of HITACHI.
- DO NOT modify the electrical wiring. It may cause serious accidents.
CAUTION:
- DO NOT install the controller and cable at such places as:
- where there is oil vapor and the oil is dispersed.
- where the hot springs are near (in a sulfuric environment).
- where generation, flowing, staying or leaking of flammable gas is detected.
- where the sea is near (in the salty environment).
- an acid or alkaline environment.
- where children can touch
- where the air from the air conditioner is directly discharged
- DO NOT install the indoor unit, outdoor unit, controller and cable within approximately 3
meters from strong electromagnetic wave radiators such as medical equipment.
- In case that the controller is installed in a place where there is electromagnetic radiation,
shield the controller and cables by covering with the steel box and running the cable through
the metal conduit cable.
- In case that there is electric noise at the power source for the Indoor Unit, provide a noise
filter.
SAFETY SUMMARY
/
1
1
Publicidad
