Descargar Imprimir esta página

Moulinex Click&Cook HF506111 Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53
EN
MANUAL MODE
You can customise the speed, temperature and cooking time of your Click&Cook for your own recipes.
: select the motor speed, up to 12 progressive and continuous speeds.
: select the cooking temperature between 30°C and 120°C.
: select the operating time up to 120 minutes of continuous use.
"Pulse" selector: for a quick boost without adjusting the settings.
1- From the home screen, press
. The screen will show the three cooking touch dials (speed, temperature,
time).
2- Next, change the setting(s) using the "touch dials". Press the desired touch dial and adjust using the cursor
or the +/- buttons. For safety reasons, it is not possible to modify the temperature without modifying the cooking
time.
3- When you have adjusted all your settings, press "Start" (C2.7). When your appliance starts, the white light
around the "Start/Stop" button will fade in and out to show that the program is under way. You have the option of
pausing the appliance at any time by pressing "Pause" (C2.7) or "Start/Stop" (C3). The program is then paused
and the white light will stay on. You can restart it by pressing "Start" again (C2.7) or the "Start/Stop" (C3) button.
If you have entered the wrong program and wish to cancel it, click "Stop" on the screen (C2.6) or press the "Start/
Stop" button on the appliance for two seconds (C3).
4- When the program is complete, the appliance will beep.
Pulse function
Press "Pulse" (C2.5) in successive pulses. The screen will display operating time. For safety reasons, this function is not
available for preparations above 60°C.
12
WEIGHING SCALE.
• Press
to start the scales function.
• Place the mixer bowl or any other container on the
scale.
• To set the scale, click the "Set" button. The display will
show 0 g.
• Proceed to add ingredients up to the desired amount.
• To exit scale mode, press outside the weighing
window.
• This scale allows you to weigh your ingredients to the
nearest gram up to 5 kg. For liquids, use the measuring
cap (A1).
SETTINGS
:
You can access the "Settings" function from the home screen.
This function allows you to:
- change the language
- access the user guide at any time
- adjust the screen brightness
- reset your settings (delete favourites, choice of language, default brightness).
IMPORTANT: APPLIANCE ENTERING SECURITY MODE (E4)
As standard, your appliance is equipped with
electronic motor protection devices to ensure a long
lifespan. This electronic security system safeguards
the motor against abnormal use, meaning your motor
is completely protected.
Under certain very extreme operating conditions, or with
personal recipes (from the Internet or elsewhere), that do
not comply with the recommendations of the manual
(see "ACCESSORIES" section: volumes that are potentially
too big and/or unusually long operating times and/or not
enough time allowed between recipes), the electronic
protection system will be triggered to protect the motor. If
this happens, the appliance will stop and "E4" will appear
on the screen to show that the appliance is temporarily
non-operational.
STANDBY:
Your appliance goes into standby mode after five minutes of inactivity. An alarm will sound to warn you that the screen
is going into standby mode.
To come out of standby, press the "Start/Stop" button (C3).
• You can use the scale whilst your appliance is in use, or
you can use it as a stand-alone accessory when you are
not cooking with your appliance.
Caution
• If there is too much weight on the scale, the screen will
show "Overload".
If "E4" appears on your screen and your appliance
stops operating, proceed as follows:
• Leave your appliance plugged in and the 0/I switch (C5)
in position 1 "ON".
• Refer to the recommendations in the manual to modify
your program settings (see "ACCESSORIES" section
for ingredient quantities/cooking time/temperature/
accessory type).
• Wait half an hour for the motor to cool down.
• Flick the main appliance switch into the "OFF" position,
then flick it back to the "ON" position again to use your
appliance.
Your appliance is fully fit for use again.
Our customer service department is available in case of any
questions (see contact information in the guarantee booklet).
13
EN

Publicidad

loading