Sennheiser HD 40 Modo De Empleo página 3

Technische Daten HD 40
Wandlerprinzip.dynamisch
Akustische Arbeitsweise..offener Horer
Ubertragungsbereich. 22 -18000 Hz
Nennimpedanz. 600
S)
Kennschalldruckpegel bei 1 kHz
nach DIN 45 580. 90 dB
Klirrfaktor nach DIN 45500 .<1%
Nenubelastbarkeil nach DIN 45500
bei Prufbedmgungen nach DIN 45582. 0,1 W
Arl der Ankopplung an das Ohr. . ohraufliegend (supraaural)
Andruckkraft.ca.l,3N
Gewicht ohne Kabel.ca. 60 g
Stecker.Umversalstecker PX 1
|6.3 mm 0 Klinke/Wurfef 5)
Kabellange.3 m
Abweichung fUr HD 40 TV-Stereo
Nennimpedanz. .170
Q
Kennschalldruckpegel.93 dB
Kabellange. 7 m
Abweichung fUr HD 40 TV
Nennimpedanz.120
Q
Kennschalldruckpegel.93 dB
Kabellange.7 m
Abweichung fUr HD 40 TV-6
Nennimpedanz.
Kennschalldruckpegel.
Stecker.
Kabellange.
Abweichung fur HD 40-2
Nennimpedanz.50 17
Stecker. Umversalstecker PX 2
(6.3 mm 0/3,5 mm 0 StereokL)
Abweichung fUr HD 40-13
Stecker.6.3 mm 0 Stereoklinke
Anderungen, vor allem zum technischen FortschritL vorbehalten.
4
120 17
93 dB
3,5 mm 0 Monoklmke
7 m
DYNAMIC HEADPHONE HD 40
To wish to convince you of the supenor quality of
the dynamic open air headphone HD 40 would be
something of a paradox as you are by now already
in possession of this product However, the argu
meets for the HD 40 are in fact very convincing:
- High quality reproduction.
- Extremely comfortable thanks to very low weight
- Problem-free connection by means of unrversal
connector.
- Very flat storage space thanks to tumable driver
elements.
Models
HD 40 (ArtWo. 1948)
Stereo headphone with 3 m long connecting cable
and universal connector PX 1. Impedance: 600 Q
HD 40-2
(Art.Wo. 2398)
Stereo headphone with 3 m long connecting cable
and universal connector PX 2. Impedance: 50 17.
HD 40-13 (Art.Wo. 1947)
Stereo headphone with 3 m long connecting cable
and 6.3 mm 0 jack plug Impedance: 600 17.
HD 40 TV-Stereo
(Art.Wo. 2061)
Stereo headphone lor connection to TV-sets. With
7 m long connecting cable, volume control unit and
universal connector PX 1. Impedance. 170
Q
HD 40 TV
(ArtWo. 1953)
Mono headphone for connection to TV sets. With
7 m long connecting cable, volume control unit and
universal connector PX 1. Impedance: 120 17.
HD 40 TV-6
(ArtWo. 1952)
Same as HD 40 TV. but with 3.5 mm 0 lack plug.
Use
See illustrations
Wearing the stereo headphone
(R = red, L — yellow)
?' Connectors
® Volume adjustment
(R = red, L = yellow)
<S> Removing the ear pads
Hints for use
- Before putting on the headphone switch on your
HiFiequipment. This prevents your ears from get
ting too high sound pressure levels, if the volume
control is set to highest volume,
- Please take into consideration, that too loud hear¬
ing over a considerably long period of time may
lead to hearing damages.
Using the TV-versions
ll the volume at the headphone is too low, even with
volume controls set to maximum, please increase
volume at your TV-set.
Hints for cleaning
• Ear pads
1 Remove the ear pads from the headphone
2 Wash with a soft detergent at 30°C max. Rinse
well. Squeeze out the water and press the pads
dry with a cloth.
3. Hang them up to dry and then re fit the pads to
the headphone.
• Headphones
For cleaning the hard plastic parts use a cloth
slightly dampened with water and a mild house¬
hold detergent
Spare parts
Ear cushions (1 pair)
Order Wo. 20795
Your dealer will have these and spare parts for all
other Sennhetser headphones at your disposal. If
not please contact your next Sennheiser distribu¬
tor.
Spare parts are available up to frve years after the
production has ceased.
5