Concept QH4100 Manual página 32

Idiomas disponibles

WIRELESS CONNECTION AND COMPATIBILITY

Company Jindřich Valenta - CONCEPT cannot be held liable for incidental, indirect or consequential damages, loss of

data or losses resulting from divulgence of information in the course of wireless communication.

Successful wireless communication cannot be fully guaranteed in all Smart units and Wi-Fi networks (routers).

Considering wide variety of available devices, there may be cases, where the character or specification of the relevant

Smart unit or Wi-Fi network (router) does not allow the connection or, as the case may be, the connection may be

disturbed. The success of wireless communication via Wi-Fi networks can also be affected by various factors, including

hardware and software configuration. The connection between the robot vacuum and your Wi-Fi network can also be

affected by neighbouring Wi-Fi networks that are using the same channel, thus affecting the connection (typically, in

housing estates, apartment houses etc.). In this event, quality complaints are not accepted.

The app is owned and operated by an independent operator (hereinafter: Operator), which is not controlled by

Jindřich Valenta - CONCEPT (hereinafter: Seller). The Operator does not receive any personal data from the Seller.

When accessing to the app, the customer is sending personal data directly to the Subject, hence, the Subject becomes

personal data administrator. The app and relevant personal data protection measures are controlled by the Subject.

Compatibility:

Operation system of smart units - Android 5.0 and higher

- IOS 9.0 and higher

Wi-Fi network – 2.4 GHz

- protection WPA1 and WPA2 (WPA2 recommended)

NOTE: The system cannot be operated in Wi-Fi networks with protocol IEEE 802.1X (as a rule, corporate Wi-Fi networks).

OPERATION USING THE APP

Before operation using the app, your unit will have to be connected to your smartphone allowing access to your Wi-Fi

network.

Recommended distance during the adjustment: less than 4 meters.

Be sure your robot vacuum, router and your smartphone are not far from each other, thus avoiding problems at pairing

the units.

Downloading and installation of the app and pairing with the robot vacuum

1. Scan QR code, see below (fig. 1) or find Concept Home app in Google Play or App Store and download the app to

your smartphone. If you already have Concept Home, open the app, log in and follow the instructions for correct

pairing.

2. Press button number 5 for a long time.

3. Then press + or Add device in the app.

4. A list of devices will be displayed. Select the device.

5. Enter your Wi-Fi network and the password, or it will be added automatically.

6. Press Next

7. Confirm your selection, the device is flashing, press Next.

8. Wait until the device has been paired. After finalisation of pairing, you can start using your robot vacuum using

mobile app.

Make sure your device, router and mobile phone are close to each other for a smooth pairing. Long press on

the wifi symbol on your device.