Ventus KT001-18DR Manual De Instrucciones página 8

ON
ON / SPEED
Speed
Press this key to switch on/
switch off and select speed. The
sequence is ON, Low Speed, Mid.
Speed, High speed and OFF. The
corresponding indicator lights up.
Mode
Press this key to select mode. The
sequence is normal, natural and
sleep when this key is touched
repeatedly or continuously. The
light indicates the mode state.
Rotate
Press button once , the cooler will
begin oscillating from left to right
around 75°to get better heat
dispersion Press again to turn the
oscillation off . And you can also
manual-swing vertically louver.
Appt.
APPT. / TIMER
Timer
APPT.: When the air cooler is turn
on, press the key to set 1 to 7
hours timer to turn off. Once set ,
the indicator will show the setting
time.
Timer: When the air cooler is turn
off, press the key to set 1 to 7 hour
timer to turn on. Once set , the
indicator will show the setting
time.
8
MODE
ROTATE
COOL
Cool
Press this button with the Ventus
Cooling System turned on to start
the cool air function. The cool
air light will come on. While it is
running, make sure there is enough
water. For more efficiency, you
can add the ice containers to the
water tank. Press again to stop this
function.
Before you start your Ventus
Cooling System, open the front
louvers manually by using the
notch on the bottom right corner.