Mobiclinic SIMBA Manual De Instrucciones página 7

ES EN FR IT
5. Frame 5. Frame
3. INSTALLATION STEPS
1. Insert the seat frame (Accessory 6) into the body of the chair (Accessory
1). Insert one of the legs (Accessory 6) through the cylindrical guide
(shown in fig. 1) so that the buttons on the inside bottom of each leg
are facing inwards, with the front leg being attached to the seat cylinder
itself. Make sure that once the legs are in place, the seat of the highchair
is correctly levelled (fig. 2).
2. Insert the frames (Accessory 5) into the legs of the seat frame
(Accessory 6). Make sure that the clips on both frames match the holes
in the legs. Repeat the process for the front and rear legs.
3. Then lower the side supports of the tray and the footrest to adjust the
textile correctly (Accessory 3) in the next step.
4. Place the textile (Accessory 3) matching the holes of the textile with
the holes of the chair body (Accessory 1) indicated in fig. 3.
5. Insert the seat belt (Accessory 4) by passing the buckle at each end of
the seat belt through the holes provided for this purpose in the fabric
and through the holes in the seat. If desired, the upper height of the
harness can be adjusted by fitting it through the holes that best suit the
height of the baby (Fig. 4).
6. For the installation of the tray (Accessory 2) match the guides on the
bottom of the tray with the guides previously lowered from the body of
the chair (Accessory 1). You can select the desired distance within the
available levels.
7. Insert the wheels (Accessory 7) into the holes in the bottom of the
frames (Accessory 5).
DE PT NL SWE PL DK
6. Seat frame 6. Seat frame
Baby high chair
SIMBA
7. Wheels 7. Wheels
1 1
2 2
3 3
4 4
7