EINHELL TE-MT 18/34 Li Manual De Instrucciones Original página 16

of wood, metal and plastic in model-making, in
workshops and in the home. Use the tool and its
accessories only for the applications described.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Motor power supply: .................................... 18 V
Idling speed n .......................... 5000-34000 rpm
0
Clamping range ...............................0.8 - 3.2 mm
Attachments Ø max. ................................. 32 mm
Attachment length max. ........................... 18 mm
Spindle length max. .................................. 50 mm
Weight ........................................................1.4 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 87.0 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 98.0 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
Anl_TE_MT_18_34_Li_SPK13.indb 16 Anl_TE_MT_18_34_Li_SPK13.indb 16
= 2,438 m/s
2
h
2
- 16 -
GB
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before using the machine
Warning!
Always remove the battery before making
adjustments to the machine.
5.1 Fitting the fl exible shaft (Fig. 1/Item 1)
Use the union nut (a) to screw the fl exible shaft
(1) onto the housing of the cordless grinding and
engraving machine.
5.2 Wall-mounting (Fig. 3)
You can fasten the machine on a wall using
the mounting holes (b) provided. The correct
dimensions for drilling holes in the wall can be
found on the back of the machine.
17.07.2023 08:55:22 17.07.2023 08:55:22