PRIXTON BF250 Manual De Instrucciones página 17

ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin
Pull the ball pin out to expand the main frame, and
then insert the ball pin back.
2. Install the Front and Rear Stabilizers
Loosen the screws in the stabilizer, and insert them
into the corresponding grooves and tighten in each
stabilizer. The stabilizer with wheels attaches to the
front frame.
3. Install the Frame and Resistance Adjuster
Place the upper frame onto the main frame, tigthen
it with the bolts.
Place the resistance adjuster onto the corresponding
groove, tighten it with the bolts.
17