Glacier bay HDQFW6AC012CP Guía De Instalación Y Cuidado página 7

Operation
1
Flushing and checking for leaks
IMPORTANT: After installation is complete, remove the
aerator to the flush the water lines. Do not lose the
gasket in the aerator.
□
Ensuring the handles are in the off
position, turn on the water supply and
check for leaks. If you discover any leaks,
check your connections to ensure they
are installed properly.
□
Use a wrench (L) to remove the aerator
(B) from the faucet (J). Turn on the hot
and cold handles to allow the water to
run for at least one minute. This flushes
away any debris that could cause
damage to internal parts.
□
Turn off the water and reinstall the
aerator and housing (if applicable).
2
Removing the quick connector
CAUTION: Use caution when removing the quick
connecting hose connections in order to prevent cutting
your hands.
□
If it is necessary to remove the quick
connector, push the quick connecting
hose (I) up, hold the housing together
and pull down.
A
J
B
1
L
1
7
Please contact 1-855-HD-GLACIER for
K
2
3
HOMEDEPOT.COM/GLACIERBAY
further assistance.