PRIXTON FLEX ULTIMATE Manual De Instrucciones página 14

Operating instructions for the whole machine
Operation: press the power switch on the handle, the machine open, work in low speed
gear, when need to press the power switch, vacuum cleaner stop working.After the
vacuum cleaner is turned on, press the speed control button to make the machine switch
in high and low gear.Note that the speed control button should not be pressed for a long
time. Then the LED indicator on the battery pack will work on the machine, and the LED
indicator will flash when the power is too low.The machine stops working and needs to be
recharged.
Note:
The suction mouth must be unobstructed, and no foreign body blockage, otherwise it will
cause motor overheating caused by accident
Charging: The local charging port is at the rear of the body.Keep the vacuum cleaner off,
vacuum cleaner power adapter plug end, the round plug end into the charging jack on
the vacuum cleaner battery bag, when the back of the vacuum cleaner after the LED
indicator flashing, when the vacuum cleaner battery is fully charged, you can pull out the
power adapter plug, the vacuum cleaner can be reused.
Note:
The power adapter must use the local
configured adapter, unplug the power plug
timely after charging, and do not connect
with the power supply line for a long time
Charging hole
14
Speed adjustment button
Power switch
LED pilot lamp
LED pilot lamp