Better Homes and Gardens BHS336158813032 Manual De Instrucciones página 25

Nylon strap
Wall
Metal bracket
Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill
27. Ask assistance to position the assembled unit at the desired location and adjust the pre-attached floor
levelers to level the unit against a wall.
28. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the
unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake
restraints. If you wish to add the extra security of earthquake restraints, they must be purchased and
installed separately .
Assembly Instructions
Short screw
Long screw
and 1/8" drill bit.
Wooden stud
Floor leveler
25
Wall