Trevi IP 365 S2 Manual Del Usuario página 22

CONNECTIONS
Installation
• To turn on the device, connect the power adapter supplied to the power socket DC (5)
of the IP 365 S2(27) and the other end to the wall outlet.
• Connect one end of the HDMI cable to socket (8), connect the other end to the HDMI
socket of your TV.
• Turn on the TV and press power On/Off button (11) on the remote control.
• Wait a few seconds for the device loads the operating system.
WARNING: The unit is factory set with video output on HDMI, if you want to use the composite
AV output (cable not included), first connect the unit to a TV via HDMI and then from the
menu "Settings"/"Display"/"Screen resolution", select the video resolution to 480 or 576.
Shutdown:
• Turn off your device: press and hold the power On/Off button (11) on remote for a few
seconds and the frontal Blue LED will become Red.
Regulation framework:
At first power you need to set some parameters such as language, the connection to the
network and regulation of the framework.
Adjust the image according to your TV; to adjust the picture, select "Setting"- "Display"-
"Screenposition". Select "Zoom out" to tighten, select "Zoom in" to enlarge.
22
IP 365 S2