Publicidad
Idiomas disponibles
Idiomas disponibles
G
OPERATION
TWO BUTTON CONTROL PANEL
LIGHT - Switch A
Position 0: the light is off.
Position 1: the light is on.
SPEED - Switch B
This is used to start and set the speed of the motor, from 1 to 3, or with
continuous speed variator, depending on the version.
LIGHT - C
Motor operation indicator light.
H
FILTERS
1. METAL FILTERS
To remove the metal grease-trapping filter, using the handle A until releas-
ing it from the guide. To reposition the filter, repeat the operation in the
reverse order.
2. CHARCOAL FILTERS
To replace the charcoal filters, proceed as follows: remove the metal filters
as described above. The two filters located at the ends of the motor can
now be easily accessed.
To install the new fi lters see picture.
To order new filters, use the coupon enclosed with this booklet or provided
by the distributor.
REMOVING AND REPLACING'S INSTRUCTIONS
A
9
Publicidad
