Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel)
or
button to point to "[ENGLISH]".
5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using
the VOL(ume)
or
button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel)
or
button to point to "CHANNEL SET".
Then, press the VOL(ume)
button.
4) Press the CH(annel)
or
button to point to "AUTO MEMO".
Then, press the VOL(ume)
button.
The tuner scans and memorizes all active channels in your area.
The TV distinguishes between standard TV channels and cable (CATV)
channels.
When AUTO MEMO action is completed, the lowest memorized channel reappears on the
screen.
When you press the CH(annel)
or
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try the AUTO MEMO action again when reception conditions are better.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel)
or
button to point to "CHANNEL SET".
Then, press the VOL(ume)
button.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel)
3) Adjust the volume to the desired listening level using the VOL(ume)
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be
set up to 90 minutes, 10 minutes each time the SLEEP
button is pushed. (The timer display counts up and sleep
timer will be displayed on the screen when you press the
SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
: Press the VOL(ume)
or
button.
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
V-CHIP SET UP
V-CHIP SET UP
CAPTION
[OFF]
CAPTION [ C1]
STABLE SOUND [ON]
STABLE SOUND [ON]
STABLE SOUND
This feature stabilizes the TV volume. For example, when Stable Sound is turned [ON], the volume
will not increase suddenly during commercials or loud segments of programming.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel)
or
button to point to "STABLE SOUND".
3) Press the VOL(ume)
or
button to select "ON" or "OFF".
4) When done, press the MENU button to exit the menu.
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
STABLE SOUND [ON]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
STABLE SOUND [ON]
or
button.
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
STABLE SOUND [ON]
button after selecting AUTO MEMO,
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
STABLE SOUND [ON]
or
button.
or
button.
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel)
or
to "CAPTION".
3) Press the VOL(ume)
or
the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
CHANNEL SET
[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
V-CHIP SET UP
V-CHIP SET UP
V-CHIP SET UP
CAPTION [ C2]
CAPTION [ T1]
CAPTION [ T2]
STABLE SOUND [ON]
STABLE SOUND [ON]
STABLE SOUND [ON]
3) Press the VOL(ume)
4) Use the CH(annel)
into memory or to erase from memory.
Note: The display will return to the normal screen automatically in about
10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.
Press the VOL(ume)
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume)
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) System
You can listen to a program in MTS stereo by following the steps below.
Type of broadcast
Regular
(monaural audio)
Stereo broadcast
SAP
[To Select STEREO or MONO in Stereo broadcast]
1) Press the MENU button so that the menu
ADD/DELETE
AUTO MEMO
display appears on the TV screen.
STEREO
[ON]
MAIN/SAP [MAIN]
2) Press the CH(annel)
to "CHANNEL SET".
Then, press the VOL(ume)
3) Press the CH(annel)
"STEREO" is selected.
4) Press the VOL(ume)
button to select the
stereo mode on or off.
Stereo sound is effective
when the "STEREO" is on.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume)
3) Select the feature you wish to adjust with the CH(annel)
VOL(ume)
or
GAME MODE
Set to the most suitable position for TV
GAME.
[+] : ON
[-] : OFF
BRIGHT
Adjust until the whitest parts of the picture are
SLEEP 10
as bright as you prefer.
[+] : increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
button to point
TINT
Adjust to obtain natural skin tones.
button to select
[+] : greenish tone
[-] : reddish tone
: Press the CH(annel)
PICTURE
[-]
[+]
GAME MODE
CHANNEL SET
OFF
ON
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
STABLE SOUND [ON]
button so that "ADD/DELETE" is selected.
or
button to select the channel you wish to put
or
button to light up the channel number
or
button to light up the channel number
MENU
Display on
SELECTION
the TV screen
–Invalid–
–None–
STEREO [ON]
STEREO
STEREO [OFF]
MONO
MAIN/SAP [MAIN]
MAIN
MAIN/SAP [SAP]
SAP
[To Select MAIN or SAP in Bilingual broadcast]
1) Press the MENU button so that the menu
display appears on the TV screen.
or
button to point
2) Press the CH(annel)
to "CHANNEL SET".
button.
Then, press the VOL(ume)
or
button so that
3) Press the CH(annel)
"MAIN/SAP" is selected.
or
4) Press the VOL(ume)
button to select the
ADD/DELETE
AUTO MEMO
"MAIN" or "SAP".
STEREO
[ON]
Bilingual sound is effective
MAIN/SAP [MAIN]
when the "SAP" is selected.
button so that "PICTURE" is selected.
button.
Notes:
In the above steps, the picture adjustment
display will disappear from the TV screen
automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume)
TURE" is selected. Then, press the
CH(annel)
the display returns to the screen.
If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. "GAME"
appears on the TV screen. In this case, connect
the external source to the AUDIO/VIDEO
jacks on the front panel.
To exit the Game mode and external input
mode, press the INPUT SELECT button on
the remote control.
To cancel the Game mode only, adjust the pic-
ture control. In this case, "VIDEO2" instead
of "GAME" appears on the TV screen.
If you press the GAME button when the TV
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.
or
button.
[-]
[+]
[-]
[+]
BRIGHT
CONTRAST
ADD/DELETE
AUTO MEMO
STEREO
[ON]
MAIN/SAP [MAIN]
To show the status, press the
DISPLAY button on the remote
control.
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
or
button to point
button.
or
button so that
or
ADD/DELETE
AUTO MEMO
STEREO
[ON]
MAIN/SAP [SAP]
or
button and adjust it with the
button so that "PIC-
or
button repeatedly until
[-]
[+]
[-]
[+]
COLOR
TINT
Publicidad
