Beko VCO 62607 AD Manual Del Usuario página 8

3 Usage
3.5 Adjusting the parquet/
carpet brush
Perform the following actions on the adjustment
latch (10) located on the parquet/carpet brush (9);
• Vacuum on firm ground and parquet; extend the
brush before vacuuming.
• Vacuum on carpets and rugs; retract the brush
before vacuuming.
3.6 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the
appliance cable when it comes to
A
the yellow mark located on it. After
the yellow mark, the red mark will
come. Do not pull any more after
reaching the red mark.
2. Press the on/off button (1) to switch on your
appliance.
3.7 Adjusting the suction power
You can increase the suction power of the
appliance by turning the suction power
adjustment knob located on the body of the
appliance clockwise according to the type of the
surface to be cleaned. To decrease the suction
power, turn the suction power adjustment knob
anti-clockwise.
8 / EN
3.8 Accessories
Upholstery tool
Suitable for cleaning the floorings,
stair steps, inside of the cars,
sofas, armchairs etc.
Dust brush
Suitable for cleaning the curtains,
and sensitive and fragile objects.
Crevice tool
Suitable for cleaning the surfaces
which are difficult to clean, such as
areas remaining under sofas and
furniture.
A
WARNING: Do not make cleaning
by using the handle' s (13) end part.
3.9 Hard floor brush
The hard floor brush (14) was developed for
use on hard floors such as tile, ceramic, parquet,
wooden floors etc.
It prevents potential scratches while cleaning
hard floors thanks to its specially-developed soft
hair.
Vacuum Cleaner / User manual