Sony IT-ID80 Manual De Instrucciones página 23

Storing a number of the Caller ID list into
memory dialing buttons
To store a number into a one-touch dialing button
To store a number into a speed dialing key
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 24.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
1
Display the phone number you
want to store by pressing (+) or
(–).
2
Confirm the number and press
one of the one-touch dial
buttons ((A) to (E)).
"PRESS PGM" appears on the
display.
3
Press (PGM).
You hear a confirmation beep
and the phone stores the
number.
1
Display the phone number you
want to store by pressing (+) or
(–).
2
Confirm the number and press
(SPEED DIAL).
"ENTER 0 - 9" appears on the
display.
3
Press one of the speed dialing
numbers ((0) to (9)).
"PRESS PGM" appears on the
display.
4
Press (PGM).
You hear a confirmation beep
and the phone stores the
number.
23 EN
Caller ID Features