AVE Domus Serie Instrucciones De Uso página 42

From the monostable/bistable menu, push P1 once and select the time required:
HOLD THE BUTTON DOWN FOR THE TIME REQUIRED, TO
PROGRAMME THE TIME (MIN 5 SEC. MAX 90SEC.)
ROLLER PROGRAMMING
COMPLETED
SHUTTER
MODE
It is possible to change the setting just done by touching the same zone again with your finger for a new time
of T1, which will be saved in place of the previous time. If the time the finger is kept in place is shorter than
the minimum setting, the zone is no longer timed (and the LED becomes blue again). If the time is longer
than the max, the max value is adopted anyway. The built-in buzzer emits a short signal of both the (min and
max) times being exceeded.
ENGLISH
41