Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLING THE FRONT WHEEL
lnstallation tools: Wrench No. 12 and 17.
1. The illustration shows the wheel with brake disc, wheel shaft, shorter and longer front wheel
spacers, washer and nut.
2. Demonstration of correct positioning of front wheel shaft including correct positioning of two
front wheel spacers of different lengths. When installing the spacers incorrectly, the wheel
cannot be seated!
3. lnsert the wheel with the brake disc on the left. Push the wheel shaft from the left side and
make sure the spacers are correctly positioned (longer spacer on the left, shorter one on the
right).
4. lnstall the washer and nut.
5. Tighten properly with a torque wrench. lnflate the tire to the tire pressure specified by the tire
manufacture.
•
"
!
"l
1.
4. INSTALLING THE BRAKE CALIPER
lnstallation tools: Key No. 14
When installing the caliper, the wheel must already be mounted.
1. Align the brake caliper to the left leg of the handlebar fork. (lllustrative photo)
2. Attach the caliper to the fork with the bolts on which you first fit the fiat, then the spring and
finally the fiat washer (illustrative photo)
3. The brake disc must be located between the brake pads.
2.
4
Publicidad
