Descargar Imprimir esta página

TFA 60.2011 Instrucciones De Uso página 6

Reloj despertador digital con clima ambiente

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
TFA_No_60.2011_Anl_09_23
05.09.2023
14:14 Uhr
Seite 6
Digital alarm clock with room climate
Thank you for choosing this instrument from TFA.
1. Before you use this product
• Please make sure you read the instruction manual carefully.
• Following and respecting the instructions in your manual will prevent damage to your instrument and loss
of your statutory rights arising from defects due to incorrect use.
• We shall not be liable for any damage occurring as a result of non-following of these instructions. Likewise,
we take no responsibility for any incorrect readings or for any consequences resulting from them.
• Please pay particular attention to the safety notices!
• Please keep this instruction manual safe for future reference.
2. Delivery contents
• Digital alarm clock
• AC/DC power adaptor
• Instruction manual
3. Field of operation and all of the benefits of your new instrument at a glance
• Large LED digits
• Alarm with snooze function
• Rising alarm tone (crescendo)
• Date and weekday
• Indoor temperature and humidity with comfort level
• Highest and lowest values
• For table standing
10
4. For your safety
• The product is exclusively intended for the field of application described above. It should only be used as
described within these instructions.
• Unauthorised repairs, modifications or changes to the product are prohibited.
Caution!
Risk of electrocution!
• Plug the device only into a mains socket installed within your country's electrical safety regulations and with a
correct mains voltage (see nameplate).
• The mains socket must be located near the equipment and it must be easily accessible.
• Unplug the device immediately if any fault occurs.
• The device and the mains adapter must not come into contact with water or moisture. Only suitable for opera-
tion in dry interiors.
• Do not use the unit if the housing or the main adapter are damaged.
• Operate the device out of reach of persons (including children) who cannot fully appreciate the potential risks of
handling electrical equipment.
• Pull the plug out of the socket immediately if any fault occurs or if the unit is not used for a lengthy period.
• Only use the supplied mains adapter.
• Do not pull the plug out of the socket by its lead.
• Route the mains lead so that it does not come into contact with sharp-edged or hot objects.
Digital alarm clock with room climate
Caution!
Risk of injury:
• Keep this device and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years old).
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to
serious internal burns and death within two hours. If you suspect a battery could have been swallowed or other-
wise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking.
• Never use a combination of old and new batteries together, nor batteries of different types.
• Avoid contact with skin, eyes and mucous membranes when handling leaking batteries. In case of contact,
immediately rinse the affected areas with water and consult a doctor.
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
5. Elements
A: Display (Fig. 1):
A 1:
Humidity (HUMI)
A 2:
Comfort Level
A 3:
Alarm symbol
A 4:
Weekday
A 5:
Time/alarm/date
A 6:
Temperature (TEMP)
B: Buttons (Fig. 2):
B 1:
MODE button
B 2:
UP button
B 3:
DOWN button
B 4:
°C/°F button
B 5:
MAX/MIN button
B 6:
LIGHT/SNZ button
B 7:
LIGHT/SNZ button
C: Housing (Fig. 2):
C 1:
Battery compartment
C 2:
Power adapter output
6. Getting started
• Pull off the protection foil on the display.
• For a permanent lighting and a better reading of the display you use the power adaptor.
• First connect the lead to the device and then insert the mains plug into the socket.
• A brief beep will sound and all LCD segments will light up for about 2 seconds.
• The unit is now ready to use.
• Important! Make sure that your household voltage is 240V! Otherwise your clock may be damaged.
6.1 Battery operation
• If no permanent lighting is desired, then you can operate the device only with batteries. Open the battery com-
partment and insert three new batteries 3 x 1.5 V AAA. Ensure battery polarity is correct.
11

Publicidad

loading