Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: TO
AVOID SERIOUS
INJURY, BEFORE PERFORMING
ANY SER-
VICE OR ADJUSTMENTS:
1. Depress brake pedal fully and set parking brake.
2. Place attachment
clutch
in "DISENGAGED"
position.
3. Turn ignition key to "STOP" and remove key.
4. Make sure the blades and all moving parts have completely
stopped.
5. Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE
MOWER
1. Place attachment
clutch in "DISEN-
GAGED" position.
2. Lower attachment
lift lever to its lowest
position.
3. Disengage
belt tension rod (K) from
_IL lock bracket (L).
CAUTION:
Belt tension rod is spring
loaded. Have a tight grip on rod and re-
lease slowly.
4. Remove mower belt from electric
clutch pulley (M).
5. Disconnect
front link (E) from mower
- remove retainer spring and washer.
6. Go to either side of mower and discon-
nect mower suspension
arm (A) from
chassis and rear lift link (C) from rear
mower bracket (D) - remove retainer
springs and washers.
7. Go to other side of mower and discon-
nect the suspension
arm and rear lift
A(_ link.
CAUTION:
After rear lift links are dis-
connected,
the attachment
lift lever will be
spring loaded. Have a tight grip on lift lever
when changing position of the lever.
8.
From right side of mower, disconnect
anti-sway bar (S) from right rear mower
bracket (D) - remove retainer spring
and washer and pull mower toward
you until the bar falls from the hole in
bracket.
9. Turn tractor steering wheel to the left
as far as it will go.
10. Slide mower out from under right side
of tractor.
I
02989
21
Publicidad
