Publicidad
Idiomas disponibles
Idiomas disponibles
cleaning delicate fabrics, upholstery, wallpa-
per, parquet, laminate, etc.
4. CLEANING FLOORS
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
4.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tu-
bes.
4.3 Attach the supplied cloth to the floor bru-
sh, locking it in place with the special lever
hooks (10).
4.4Adjust the intensity of the steam by tur-
ning the adjustment knob (8); for this type of
surface we recommend Medium level steam.
4.5 Deactivate the steam lock (4)-(5) and con-
tinue with steam delivery, pressing the steam
trigger on the handle of the steam hose.
4.6 Clean the floors by moving the brush.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING:
Do
not
without the cloth.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformations have occurred.
5. CLEANING RUGS
WARNING: Before cleaning fabrics with
steam, consult the manufacturer's instruc-
tions and always carry out a test on a hidden
part or on a sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
5.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
5.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tu-
bes.
5.3 Adjust the intensity of the steam by tur-
ning the adjustment knob (8); for this type of
use
the
appliance
surface we recommend Medium level of steam.
5.4 Deactivate the steam lock (4)-(5) and con-
tinue with steam delivery, pressing the steam
trigger on the handle of the steam hose.
5.5 Pass the brush without cloth over the sur-
face to bring dirt to the surface.
5.6 Attach the supplied cloth to the floor bru-
sh, locking it in place with the special lever
hooks (10).
5.7 Go back over the surface to collect the
dirt.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
6. CLEANING CARPETS
WARNING: Before cleaning fabrics with
steam, consult the manufacturer's instruc-
tions and always carry out a test on a hidden
part or on a sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
6.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
6.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tu-
bes.
6.3 Adjust the intensity of the steam by tur-
ning the adjustment knob (8); for this type of
surface we recommend Medium level of steam.
6.4 Ensure that the steam lock on the handle
is deactivated (4)-(5).
6.5 Attach the supplied cloth to the floor bru-
sh, locking it in place with the special lever
hooks (10). Proceed rapidly and without pres-
sing over the carpet, running the brush
forward, backward and sideways without pau-
sing too long at the same point.
If the carpet is very dirty or saturated with
cleaning products, do not to insist too much.
Results will be evident only after a few uses
of Vaporetto.
7. CLEANING GLASS, WINDOWS
AND TILES
WARNING: To clean glass surfaces during
cold weather, preheat the windows starting
to vacuum from a distance of about 50 cm
from the surface.
| 29 |
Publicidad
