Publicidad
5. Locate the right side of the access point
that has a small lock symbol on it, and
make sure to line up this side with the
side of the mounting ring that has Open -
Lock written on it.
6. Twist clockwise to lock the access point
onto the ring. The lock symbol on the
access point must point directly to the
Close text on the mounting ring.
Mounting Using Ceiling
Brackets
Installation
1. Clip two ceiling brackets on the ceiling
panels. Make sure both bracket are
parallel.
Ceiling crossbar
Ceiling bracket
2. Use the provided screws to attach the
mounting ring to the ceiling bracket.
3. Plug the CAT 5 cable into the LAN port on
the access point.
4. Place the DWL-8620APE onto the
mounting ring and rotate the device
clockwise to lock it in position.
D-Link DWL-8620APE Quick Install Guide 5
Publicidad
