HOLZMANN MASCHINEN DSM 150 Manual De Instrucciones página 11

The double bench grinder must stand on a level solid vibration resistent
ground with the rubber feet mounted..
If used stationarily, we recommend to fix the machine permanently tot he
underground (e.g. workbench, machine stand)
While the grinding discs wear, you need to readjust conitinuously the tool
rest and the security glass.
Check the status of the grinding disc before use. Defect grinding discs shall
be replaced immediately.
When installing a new grinding disc, we recommend for a long lifespan to
mount the disc as precise as possible in order to avoid out-of-balance run
and uneven wear of the disc.
Never leave the running machine unattended. Always shut the machine off
and wait until the grinding disc stands still before leaving the workplace.
Always disconnect the machine from the power supply before performing
any maintenance, upkeep or other activities.
Never use the power cable for lifting the machine, pulling it etc ...
2.1 Misuse
Do not operate the machine outside the stated technical restrictions laid down in this manual.
Do not use the machine for purposes it is not designed for, do not manipulate the machine.
Do not operate the machine without security devices.
Do not dismount the grinding disc protection.
Do not use grinding discs with max. rotation under 3000RPM
Do not use the machine for grinding any material that can material that is easily flammable
or poses an explosion hazard when being processed.
Do not manipulate the machine.
HOLZMANN MASCHINEN does not take any responsibility for damages to machine and health
being a direct or indirect cause of misuse.