Matco Tools MT3872RL Manual Del Usuario

LONGITUD EXTENDIDA 0.75 HP BAJO PERFIL DE CORTE REVERSIBLE 4"
TRONÇONNEUSE ALLONGÉE 0,75 HP SURBAISSÉE RÉVERSIBLE 4PO
4" REVERSIBLE EXTENDED LENGTH
0.75HP
WARNING
• MAXIMUM RPM OF 12,000
• MAX. AIR PRESSURE:
90 PSIG, 6.2 BAR
RPM OF THE ACCESSORY
RPM RPM RPM
MUST EXCEED TOOL RPM
ALWAYS READ
INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR FACE
PROTECTION
ALWAYS WEAR HAND
PROTECTION
AVOID PROLONGED
EXPOSURE TO VIBRATION
LOW PROFILE
CUT OFF
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
S P E C I F I C A T I O N S
Free Speed ................................................ 12,000 RPM
Rated Power ..................................................... 0.75 HP
Wheel Size ...................................................................4"
Air Inlet ........................................................... 1/4" NPT
Average Air Consumption .............................3.38 cfm
Recommended Hose Size ............................... 3/8" I.D.
Net Weight ..................................................... 3.01 Lbs.
Overall Length ..................................................... 14.57"
Sound Pressure Level ......................................85 dBA
Vibration Level ............................................. 1.3 m/sec²
WARNING
Copyright © Professional Tool Products, 2021
MT3872RL
• Operating Instructions
• Warning Information
• Parts Breakdown
All rights reserved.