Publicidad
Idiomas disponibles
Idiomas disponibles
en
10
Intended use of the power tool:
Magnetic core drill unit for drilling with core
drill bits and solid drill bits, countersinking
and tapping on materials with surfaces suit-
able for magnets in weather-protected envi-
ronments using the application tools and
accessories recommended by FEIN.
The carrying handle is used for transport of
the power tool.
Operation of the power tool off power generators.
This power tool is also suitable for use
with AC generators with sufficient
power output that correspond to the Stan-
dard ISO 8528, design type G2. This Stan-
dard is particularly not complied with when
the so-called distortion factor exceeds
10 %. When in doubt, please refer to the
generator instruction/specification guide.
In environments subject to interference, a
reduction of the operating quality is possi-
ble; this can include temporary failure, tem-
porary reduction of the function or the
intended operating behaviour, for the cor-
rection of which intervention by the opera-
tor is required.
Observe the operating instructions and the
national regulations for the installation and
operation of the AC generator.
Operating the power tool
WARNING
off power generators whose
no-load speed exceeds the voltage value on
the type plate of the power tool is prohib-
ited.
Publicidad
