Bose FreeSpace DS 40SE Guia De Instalacion página 22

Mounting the Bracket
pro.Bose.com
US-ONLY • KUN USA • NUR USA • SOLO EE UU • ETATS-UNIS UNIQUEMENT • SOLO USA • ALLEEN VS • ENDAST USA
With standard steel4
11
x 4
11
junction box
The FreeSpace® DS 40SEISC loudspeaker can be mounted
directly on standard U.S. steel 4" x 4" junction boxes. There may
be several junction boxes available that are compatible with the
FreeSpace DS 40SEISC wall mount bracket, but Bose Corporation
only recommends the junction boxes it has validated.
U.S. 4- x 4- Standard Steel Junction Boxes Approved by Bose
Manufacturer Catalog Number
Steel City 52151-1/2 & 3/4-EW
Raco 232/8232
Please check pro.Bose.com for an up-to-date list of Bose®
validated junction boxes.
Page 22 English
• It is the responsibility of the installer to properly install junction
boxes to ensure the safety of the loudspeaker installation.
Consult a building professional for the proper junction box
installation methods before installing the loudspeaker.
• The junction box should be installed in such a way that it is
structurally capable of supporting the weight of the loudspeaker.
A 10:1 safety weight ratio is recommended.
• Failure to properly install a junction box or loudspeaker could
result in damage, injury, or death.
• When installing the FreeSpace DS 40SEISC loudspeaker on
a Bose-validated on-wall junction box, only two (2) of the four
(4) screw holes of the wall mount bracket will be used. Bose
has conducted extensive tests to ensure that this loudspeaker
mounting scheme results in a safe installation. This loudspeaker
mounting scheme has passed a 10:1 safety weight ratio test.
• Use #8-32 x %"screws with #8 washers or #8-32 x %"truss
head screws to mount the bracket to the junction box.
Ins tallation and Safety Guidelines