Publicidad
Idiomas disponibles
Idiomas disponibles
OWNER'SRESPONSiBiLiTIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MAINTENANCESCHEDULE
MAINTENANCETASK
PRESSURE WASHER
Chec_Ncieanwater inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for leaks
Purge pump of air and contaminants
Prepare pump for storage below 32°F
ENGINE
Before
Each Use
X 1
}(
N
N
}(
OPERATINGiNTERVALS
I Every 25
Every 50
Every 100
Hours or
Hours or
Hours or
Yearly
Yearly
Yearly
See Winter
Storz_ge
100-300
Hours
SERVICEDATES
FILL IN DATESAS YOU COMPLETE
REGULARSERVICE
Check oil bye[
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Clean cooling system
Clean combustion chamber
Prepare for storage
X
X
X _
X_
X
X
X_
If unit is to remain idle for longer than 30 days,
Clean if clogged. Replace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Changesooner when operating under dirty or dusty conditions.
Replace more often under dirty or dusty conditions,
GENERALRECO 'JMENDATION$
Regular maintenancewill improve the performance and
extend the iife of the pressure washer. Seeany Sears or
other quaiified service deaier for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negiigence. To
receivefurl vatue from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detaiied in Storage.
Some adjustments wiii need to be made periodicaliy to
properly maintain your pressure washer.
AtI service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedu/echart above.
NOTE:Oncea year you should clean or replace the spark
ptug and repiace the air filter. A new spark piug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last Ion@r.
ENIi$$i0N CONTROL
Maintenance, replacementor repair of the emission control
devices and systems may be performed by any non-road
engine repair establishment or individual.
BEFOREEACHUSE
1.
Checkengine oil bvei.
2.
Cleandebris.
3.
Checkwater inlet screen for damage.
4.
Checkhigh pressure hose for leaks.
5.
Checkcteaning tank for damage.
6.
Checkgun and nozzteextension assembly for leaks.
7.
Purge pump of air and contaminants.
PRESSURE W ASHER MAINTENANCE
Clean Debris
Daily or before use, clean accumuiated debris from cbaning
system. Keep iinkage, spring and controis cban. Keep area
around and behind muffler free from any combustible debris.
Inspect cooiing air siots and openings on the pressure
washer. These openings must be kept ciean and
unobstructed.
Cleaningsystem parts should be kept clean to reduce the risk
of overheating and ignition of accumuiated debris.
.
Use a damp cioth to wipe exterior surfaces clean.
o
Use a soft bdstte brush to loosen caked on dirt, oil, etc.
16
Publicidad
