Publicidad
DO NOT PRINT GREY OUTLINES
- CUTTER GUIDE
THANKS!
Thanks for choosing our
MIXX Tribute Vinyl Record Player.
All of our products come with a 2 year warranty for
peace of mind. Feedback is welcome, email us on
support@mixx-io.com for any comments or queries.
WHAT'S IN THE BOX?
Before you throw away any of the packaging, please take a
moment to carefully check and ensure that all of the following
items are in the box:
Turntable
45 RPM adapter
Turntable
45 RPM
AC Power
Power adaptor
Adapter
Adapter
If you find that any of these accessories are missing, please
reach out to Mixx customer service for further assistance.
Please hold on to the original packaging materials in case you
need to exchange or return any items later on.
LET'S GET STARTED
Find a flat and level surface to place the unit on. It's important
to choose a stable location that is free from vibrations.
Remove both the tie-wrap that secures the tonearm
4
and the rubber ring from the turntable spindle
2
[2]
Connect the AC adaptor to the Power Jack
16
[16]
of the unit.
Note: It's crucial not to plug the AC power adaptor
into the power outlet until you've completed
all the assembly steps. Before powering on,
double-check that all the connections are
set up correctly. Remember to always
turn off the power when connect-
ing or disconnecting any
components.
LET'S PLAY
10
1. Rotate the On/Off Volume Knob
to turn
[10]
on the power.
2. Set the Function Switch
8
to the
[8]
PHONO position.
Note: The Function Indicator
9
will be RED.
[9]
3. Set the Speed Switch
5
to the appropriate speed for the
[5]
record you are playing. (e.g., 33 RPM, 45 RPM, or 78 RPM).
4. Place the record on the turntable. Use the 45 RPM Adapter
if necessary to accommodate records with larger center holes.
5. Remove the stylus protector from the stylus assembly.
Note: Make sure to keep the included stylus guard in place
whenever the turntable is moved or cleaned to avoid damaging
the stylus.
6. Release the tonearm Hold Down Clip
13
. This clip holds the
[13]
tonearm
4
in place when the turntable is not in use. Remember
[4]
to lock it back when the turntable is not in use.
7. Use the Tonearm Lever
6
to lift up the tonearm
4
[6]
[4]
8. Carefully move the tonearm
over the record to the desired
4
[4]
starting position for playback.
Set the Tonearm Lever
back to the down position, and
6
[6]
the tonearm
4
will slowly descend onto the record and
[4]
begin playback.
[4]
9. When the record is finished playing, use the Tonearm
.
Lever
again to raise the tonearm
.
6
4
[6]
[4]
Return the tonearm
4
to the Tonearm Rest.
[4]
Release the lever
6
to let the tonearm
4
sit
[6]
[4]
back at its rest. If you want to suspend playback
temporarily, repeat these steps.
10. Lock the Tonearm Hold Down
Clip
13
to secure the tonearm
4
[13]
[4]
in place for storage.
1
3
[3]
gently.
Publicidad
