INTRODUCTION
EN
Thank you for the purchase of our quality product. Used carefully and in accordance with the instructions set
out below. Please read and keep these instructions for future reference.
BEFORE USE
1. Take the heater out of the box
2. Remove the packing material
3. Check the installation parts.
INSTALATION
- The panel convector heaters should be wall moun-
ted. Some items can be also stand with feet.
- Mount feet on the baseboard in accordance with
scheme G1.
- For wall mounting study scheme G2.
A.Uninstall the bracket from the body,see the
image1
B. Drill the holes at each sides on the wall,then insert
the plastic expanded plugs within fix the bracket in
the wall with screw,see the image2
C.Fit the heater into suitable position ensuing that
the holes align with bracket.see image3
D.Tight the screw on the top of bracket to catch
steady,see image4.
- Pay attention to the position of the convector with
regard to other objects. - It is forbidden to place item
under the socket.
- The convecto r has got IP24 degree of protection
- If you place item in bathroom, avoid ingress of
water on the surface.
16 | www.garsaco.com
G1
G2
USE OF THE ITEM
- Place the heater on flat stable surface
- Switch thermostat knob in off position
- Plug the heater in
- By turning the handle of thermostat clockwise or
counter clockwise set the required temperature.
For fast heating of the room set the thermostat
handle at maximum level.
As soon as required temperature will be reached,
turn thermostat handle counter clockwise until you
hear click. The heating elements will switch off. In-
dicator light will be also off.
- Convector will automatically switch on when
temperatures decreases and it will automatically
switch off when temperature increases. The com-
fortable ambient temperature is maintained.
- If the appliance is not used for a long time--switch
it off with power switch and plug the item out
- Attention! Do not cover the product! Convector
should not be place under shower or in swimming
pool