Publicidad
Idiomas disponibles
Idiomas disponibles
Flash warning system for hypertensive readings
If the measured
values fall within the hypertension
range, the reading
displayed on screen flashes on and off to alert user.
According to JNC 7 Classification, values consistently in excess of 140 mmHg
(Sys.) and/or 90 mmHg (Dia.) are considered to constitute high blood pressure.
Fig. 7
AR
do
VAN
mmHg
sys. 7 n my
Hypertension
mig
=
a
|)>
(Stage
1, Stage 2)
NO,
yy
=
90
pia.
dvd
mmHg
(m
amm
Prehypertension
lalla
80
Pulse@g
MI Z
/min.
ela
a
>
BA
120
140 (mmHg)
Systolic
e Blood pressure readings will flash for approx.
6 seconds when in the high
blood pressure range (Fig. 7).
Systolic blood pressure:
140 mmHg and over
Diastolic blood pressure:
90 mmHg and over
(Only when measurement is complete)
When an Error Occurs During Measurement
Fig. 8
es
An E will appear on the display to indicate that measure-
ment was
unsuccessful
and should
be performed
again
(Fig. 8).
Before performing another measurement, always press the
On/Off and Start button to turn off the unit and make sure to
allow a rest period of 4 to 5 minutes before starting again.
Please
consult your doctor without delay if the blood
pressure indicator repeatedly draws attention to elevated
blood pressure values.
16
Publicidad
