Publicidad
Control panel
∫
Returning the custom settings to the default setting
Press and hold the [OK] button and [BACK LIGHT] button together for more
than 2 seconds.
The control panel will blink once when settings are reset.
Display of the distance unit does not return to the default setting.
Camera without Communication Functions
∫
AUTO
Set aperture and ISO sensitivity to the values selected with the camera.
1 Set the flash mode to [AUTO].
"Flash Mode" (P10)
• When [AUTO] is selected, pressing [MODE] (3) button
allows you to set the aperture. Press the [MODE] (3)
button again to turn back.
2 Match the zoom position to the focal length of the lens.
"[ZOOM]" (P11)
3 Adjust aperture and ISO sensitivity.
"Other Settings" (P15)
If the selected values are out of the flash working range, [ISO] and [F] will blink in
the display. The [AUTO CHECK] lamp blinks for about 5 seconds after the shutter
is released to show that the flash has fired successfully.
∫
MANUAL
Choose the guide number.
1 Set the flash mode to [MANUAL].
"Flash Mode" (P10)
2 Match the zoom position to the focal length
of the lens.
"[ZOOM]" (P11)
3 Set the guide number.
"Other Settings" (P15)
Option
Description
This allows you to check the lighting and
shadow effects in advance.
Modeling
[ON]: Fires a test flash many times in
succession for approximately 1 second.
flash
[OFF]: Fires a flash once with the flash intensity
you specify.
17
VQT5F44
Publicidad
