setup
DAY/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1.
Select <CAMERA SET> - <DAY/NIGHT>.
2.
Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of
the scene.
NIGHT : Fixed to NIGHT mode,
regardless of the scene.
If BURST is set to <ON>, the burst
signal will be output along with the
black-and-white composite video signal.
AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice
versa.
-
BURST : If set to <OFF>, the burst
signal will not be output in NIGHT mode.
-
DAY NIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW fi lter.
Adjusting from HIGH to LOW will cause
to switch the fi lter in a darker screen.
-
DAY NIGHT DWELL TIME : Time
required to determine the fi lter switch.
-
NIGHT DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the
fi lter in a darker screen.
-
NIGHT DAY DWELL TIME : Time required to determine the fi lter switch.
-
MASK AREA : If there exists a bright
spot light source in a night scene, you
can specify the size and position as
needed.
This will prevent an error in switching
fi lter, or failure to determine the fi lter
switch in a night scene where a bright
spot light source exists.
Any excessively bright area in a night
scene will be MASKed.
28_ setup
DAY/NIGHT
WHITE BAL
WHITE BAL
FOCUS MODE
FOCUS MODE
ZOOM SPEED
ZOOM SPEED
DISPLAY ZOOM
DISPLAY ZOOM
DISPLAY P/T
DISPLAY P/T
DIGITAL ZOOM
DIGITAL ZOOM
DETAIL
DETAIL
V-SYNC
V-SYNC
AUTO
AUTO
BURST
DAY NIGHT
DAY
NIGHT
BRIGHTNESS
BRIGHTNESS
DWELL TIME
DWELL TIME
NIGHT
NIGHT DAY
DAY
BRIGHTNESS
BRIGHTNESS
DWELL TIME
DWELL TIME
MASK AREA
MASK AREA
MASK AREA
MASK AREA
<SIZE>
<LOCATION>
<LOCATION>
AUTO
ONEAF
ONEAF
[ 2 2 ] ]
[
OFF
OFF
OFF
OFF
OFF
OFF
[
[ 2 2 ] ]
INT
INT
OFF
MID
MID
2SEC
2SEC
MID
MID
5SEC
5SEC
1
1
2
2