Silvercrest SSMA 67 B2 Instrucciones De Uso página 14

Storage
■ Store the cleaned appliance in a clean, dust-free and dry place without
direct sunlight.
■ Allow the appliance to dry completely before assembling it.
Always place the blender jug 4 on the motor unit 9 so that the cross blade
■
5 is not exposed.
■ To ensure a long battery life, recharge the battery at regular intervals during
extended periods of non-use.
Troubleshooting
Fault
The appliance
is not working.
The cross
blade 5 jams
during start-up
The chopping
process is
halted
Liquid
leaks out of
the lid 1
If you are unable to resolve the problem by following the above-mentioned
suggestions, please contact the customer service department (see Service
section).
SSMA 67 B2
Cause
The indicator light 8
flashes red 10 times.
The battery is empty.
The indicator light 8
flashes red 5 times.
The blender jug 4 is not
screwed on correctly.
The appliance has over-
heated.
The appliance is defective.
Pieces too large or
not enough liquid.
The indicator light 8
flashes white 5 times and
red 5 times: appliance is
overfilled or ingredients
are too hard.
The cross blade 5 is
blocked.
The sealing ring 2 is not
inserted correctly.
Solution
Charge the battery.
Screw the blender jug 4 on
properly.
Allow the motor to cool for 30
minutes.
Contact the Customer Service
department.
Cut the fruit into smaller pieces.
Top up with liquid up to the MAX
mark.
Only add soft ingredients in
small pieces.
Switch off the appliance and
remove any excess ingredients.
Do not exceed the MAX mark.
Insert the sealing ring 2
correctly.
GB │ IE │ 11 ■