HQ-Power LEDA03C Manual Del Usuario página 6

• When selecting
down button to set the changing speed:
30s 20s
c) sound mode
• In this mode, colour step changing is activated by the beat of the music.
• Press the menu button and press the up- or down button until the display [C] shows
• Press the enter button and use the up- or down button to set the sound sensitivity:
: very high sensitivity
d) DMX mode
• In DMX mode, the system can be controlled via 6 channels.
• All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to "listen"
to the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.
• When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
• In case of the 6-channel LEDA03C, you will have to set the start address of the first unit to
001, the second unit to 007 (1 + 6), the third to 013 (7 + 6), and so on.
• Press the menu button and press the up- or down button until the display [C] shows
• Press the enter button and use the up- or down button to set the DMX address:
CH1 0 – 150: colour mixing
CH2 red: 0-100%
CH3 green: 0-100%
CH4 blue: 0-100%
CH5 strobe:
0-20: no function
21-255: slow to fast
CH6 dimming:
0: intensity 100%
255: intensity 0%
• When the value of channel 1 is between 151 and 230, the function of channel 2 is given below:
1 ~ 12 red
13 ~ 25 green
26 ~ 38 blue
39 ~ 51 yellow
52 ~ 64 magenta
65 ~77 cyan
78 ~ 91 white
• When the value of channel 1 is between 231 and 255, the system is running in sound mode. Set
the sound sensitivity level according to desired effect and ambient noise levels
11/12/2009
, or
10s 7s
151 – 230: colour macros
and auto programs
select 18 colours or 2
programs
speed: slow to fast
-
strobe:
0-20: no function
21-255: slow to fast
dimming:
0: intensity 100%
255: intensity 0%
92 ~103 orange
104 ~ 116 purple
117 ~ 129 yellow/green
130 ~ 142 pink
143 ~ 155 sky blue
156 ~ 168 orange/red
169 ~ 181 pale green
LEDA03C
, press the enter button again and use the up- or
5s 4s
182 ~ 195 chocolate
195 ~ 207 light blue
208 ~ 220 violet
221 ~ 233 gold
234 ~ 246 step change
247 ~ 255 cross fade
6
3s 2s
: very low sensitivity
231 – 255: sound activation
-
-
-
-
-
1s 0.5s
.
.
©Velleman nv