Dometic ACC3100D Instrucciones página 11

5 Intended use
The air purifier is only intended to be installed to the ACC3100D ventilation systems. The air purifier is intended to
clean the air and to reduce dust, odors, particles, and mold.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor in-
stallation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6 Technical description
The air purifier cleans the air and reduces dust, odors, particles, and mold. For this purpose the air purifier uses nee-
dle point ionization to create both negative and positive ions that purify the air. The purified air is carried through the
ductwork and out into the ventilated space.
7 Installation
WARNING! Electric hazard
Disconnect the electrical connections before installing the device.
1. Remove the upper cover of the rooop unit.
Fig.  on page 1
2. Mount the air purifier.
Fig.  on page 2
3. Mount the upper cover of the roof top unit.
Fig.  on page 2
4. Remove ADB center cover.
Fig.  on page 3
5. Remove the cable ties.
NOTICE! Damage hazard
• Do not cut the cable.
• Disconnect the plugs without using force.
Fig.  on page 3
EN
9