Publicidad
Idiomas disponibles
Idiomas disponibles
SinePower
6
Intended use
!
WARNING!
Never use the inverter on vehicles where the positive terminal of the
battery is connected to the chassis.
The wave inverter converts direct current into a 230 – 240 V AC supply of 50 Hz or
60 Hz:
• 12 Vg: DSP1312T, DSP1812T, DSP2312T, DSP3512T
• 24 Vg: DSP1324T, DSP1824T, DSP2324T, DSP3524T
7
Technical description
The inverters can be operated wherever a DC connection is available:
• 12 Vg: DSP1312T, DSP1812T, DSP2312T, DSP3512T
• 24 Vg: DSP1324T, DSP1824T, DSP2324T, DSP3524T
The light-weight and compact construction of this device allows for easy installation
in mobile homes, commercial vehicles or motor and sailing yachts.
The output voltage corresponds to the household voltage from the socket (pure sine
wave, THD < 3 %).
Please observe the values for constant output power and peak output power as
indicated in chapter "Technical data" on page 23. Never connect devices that have
a higher power requirement.
I
NOTE
Note when connecting devices with an electrical drive (such as power
drills and refrigerators), that they often require more power than is
indicated on the type plate.
The inverter has various protective mechanisms.
• Overvoltage shutdown: The inverter shuts itself off when the input voltage
exceeds the cut-off value. It restarts when the voltage returns to the restart value.
• Undervoltage shutdown: The inverter shuts itself off when the input voltage
falls below the cut-off value. It restarts when the voltage rises to the restart value.
• Excess temperature shutdown: The inverter switches off when the tempera-
ture inside the device or the temperature on the cooling element exceeds a cut-
off value. It restarts when the temperature falls below the restart value.
EN
Intended use
9
Publicidad
