Publicidad
Idiomas disponibles
Idiomas disponibles
• Cut the foam strips to t the depth of the stacking kit
frame. A x the foam strips to the top of the stacking
kit frame.
• For safety reasons, the stacking kit frame must be
screwed on to the washing machine cover using the 4
screws included in the kit. Ensure that the screws do
not damage any of the underlying washing machine
components. Place your dryer on the stacking kit
frame. Once again, the previously attached foam
strips act as padding. The dryer feet must be screwed
all the way in and may not rest on the pull-out shelf
plate. It is possible that the feet may have to be
completely removed, so that the body of the dryer is
truly only resting on the side beams.
• Mount the shelf plate and check that it moves easily.
• Secure the stacked dryer/washing machine
arrangement using the lashing strap provided to
prevent the dryer from toppling over, e.g. due to
pulling on the door. Fit the strap around the entire
column (i.e. washing machine and dryer), feed it
through the clamping lock and pull it tight.
5. Technical Data
Base area
Payload sliding plate
Lashing strap
Screws
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.
60 x 60 cm
max. 10 kg
> 90°C | max. 800 daN
max. length 20 mm
7. Terms of waranty
HAMA GmbH & Co KG grants you an extended
manufacturer's warranty for this product that covers
the freedom from defects, usability, workmanship
and durability of the materials used for the speci ed
period of 10 years. Compatibility of the product with
future standards for further developed hardware is also
excluded.
At the discretion of Hama GmbH & Co KG, valid
warranty claims in this period will be resolved at no cost
either by repair or replacement. The warranty period
begins on the date of purchase of this product and is
valid throughout the EU.
The warranty you are entitled to is in addition to your
statutory rights and does not affect them. The warranty
does not cover damage caused by improper use, normal
wear and tear, exposure to chemicals, force majeure,
or modi cations or repairs performed by yourself or
third parties. Furthermore, this warranty does not cover
accessories that are not included with the product as
standard (promotional parts).
In the event of a warranty claim please write to us,
enclosing proof of purchase, at Hama GmbH & Co
KG, Dresdner Str. 9, 86653 Monheim, Germany. You
are also free to contact us at www.hama.de or by
telephone on +49 (0)9091/502-0.
3
Publicidad
