flow-med u-sonic 3 Manual De Instrucciones página 4

EN INSTRUCTION FOR USE
Perfect cleaning and care with ultrasound
Especially for small products, germ-free, deep cleaning is important for daily use, personal hygiene and value retention. Powerful ultrasound
at 42 kHz ensures hygienic cleanliness even with clear water.
Initial operation
1. Plug the USB cable into a USB power supply (5V/2A) and the USB-C plug into the socket on the rear of your u-sonic 3.
2. Then plug the power supply unit into a mains socket.
The u-sonic 3 is charged in approx. 3 hours and is ready for operation for approx. 7 short cleanings
or 3 intensive cleanings.
Operation
1. Fill the stainless steel tub of the u-sonic 3 with water up to the mark. You can also use the lid for this purpose.
2. Place the parts to be cleaned in the cleaning basket or directly into the water and close the lid.
3. Touch the sensor button 1x briefly and the ultrasonic cleaning starts
in the short program 4 minutes.
4. Touch the sensor button 2x briefly and the ultrasonic cleaning starts
in the intensive program 8 minutes.
5. After ultrasonic cleaning is completed, the unit automatically switches off in stand-by mode.
6. Open the lid and remove the cleaned parts
7. After each cleaning, empty the water into a drain basin
2
i LED 1 flashes green.
i LED 1 lights up green
i LED 2 display flashes
i LED 3 indicator flashes
i all LEDs switch off